Home > Systems > 2.4 Locking System >

2.4mm Locking System Drill Guides

<!351>2.4mm Locking System Drill Guides

The VID Universal Locking System Combination Drill Guides are the only special instrument you need for the entire system. This drill guide can be used with any VID Locking Plate! It is not compatible with any other system.
The combination drill guide's unique design maximizes the efficiency of drilling by eliminating the need to line up and screw in threaded drill guides. Simply align the corners of the drill guide with the notches of the universal locking screw hole to establish stable connection. You have a choice to use the straight end of the guide for perpendicular insertion or the funneled end of the guide to aim up to 15 degrees from the axis in the 360 degree direction. Your VID locking screw will lock in naturally.
Use the 2.7mm guide with a 2.0mm drill bit for the following screws:
  • 2.7mm VID locking screws
  • 2.7mm AO/ASIF self-tapping cortical screws
  • 4.0mm cancellous screws

Key Benefits
  • Star-Shaped Quick-Connect Mechanism
  • 30° Polyaxial Screw Insertion
  • Monoaxial Screw Insertion
  • Compatible with all VID Locking Plates
  • Allows the Use of a 1.6mm Drill Bit for Locking Screws in Either End
  • Allows the Use of a 1.8mm Drill Bit for Non-Locking Screws in the Polyaxial End Only
For Locking Screw Insertion
  • Use a 1.6mm drill bit in the polyaxial OR monoaxial end of the guide
For Non-Locking/AO Screw Insertion
  • Use a 1.8mm drill bit in the polyaxial end of the guide ONLY

Item# Item Name Qty
DGLCO24 !5002.4mm Combination Drill Guide

Share your knowledge of this product. Be the first to write a review »